Home ProductsMetallographic Mounting Press

Laboratory Metallographic Hot Mounting Press Manual Metallurgical Sample Mounting Press

Certification
Good quality Micro Vickers Hardness Tester for sales
Good quality Micro Vickers Hardness Tester for sales
Customer Reviews
The touch screen micro vickers hardness tester has been installed a few weeks ago, everything is OK. Thanks for your advice and excellent service.

—— Mr. David Chambers

Thanks for the fast delivery and our customer is very satisfied for the rockwell hardness tester, and hope more orders soon.

—— Neil Renato

After we visited the customer, they finally decided to purchase Brinell hardness tester iBrin-413Z, now we have installed the unit at customer’s site,

—— Fermin Lee

Thank you for the indenters (diamond  cone 120 degrees). We recently got it and already tested it. Indenters  are good as we expected. 

—— Dalius Skinulis

The Measurements are good for Brinell Tester HBST-3000.

—— Sun Chull Kim

I'm Online Chat Now

Laboratory Metallographic Hot Mounting Press Manual Metallurgical Sample Mounting Press

China Laboratory Metallographic Hot Mounting Press Manual Metallurgical Sample Mounting Press supplier
Laboratory Metallographic Hot Mounting Press Manual Metallurgical Sample Mounting Press supplier Laboratory Metallographic Hot Mounting Press Manual Metallurgical Sample Mounting Press supplier Laboratory Metallographic Hot Mounting Press Manual Metallurgical Sample Mounting Press supplier Laboratory Metallographic Hot Mounting Press Manual Metallurgical Sample Mounting Press supplier

Large Image :  Laboratory Metallographic Hot Mounting Press Manual Metallurgical Sample Mounting Press

Product Details:

Place of Origin: Dongguan/China
Brand Name: iqualitrol
Certification: CE
Model Number: XPress-386

Payment & Shipping Terms:

Minimum Order Quantity: 1 Set
Price: Negotiable
Packaging Details: Plywood Box
Delivery Time: 20 Working Days
Payment Terms: T/T, Western Union
Supply Ability: 50 Sets per Month
Contact Now
Detailed Product Description
Diameter: Mould Dia 30mm Temperature: Range Max 190 Deg C
Power: Power Consumption 800W Voltage: Power Supply 220V/50HZ/1Ph
XPress-385: Mould Dia 22mm XPress-387: Mould Dia 45mm

 

Laboratory Metallographic Mounting Press Manual Metallurgical Sample Mounting Press

 

 

Brief Introduction:

XPress-385 is used to do Metallographic Sample mounting, for small, difficult-to-hold or irregular specimens for metallographical test.

 

It can facilitate polishing and watch properly the ideal material structure and measure the hardness of the material by hardness tester. The inserts for this machine are limited to thermo setting materials only.

 

The punching temperature of different thermo setting materials can be adjusted depending upon the features of materials .The inserts are available from the sales agency of our company .

 Laboratory Metallographic Hot Mounting Press Manual Metallurgical Sample Mounting Press


Technical Parameters:

Model XPress-385
Sample diameter 22mm (Optional 30mm, 45 mm)
Thermoforming ranges MAX190 Deg C
Timer range 0-30min
heating power 800W
Input voltage 220V/50HZ/1Ph
Dimension 260mm x360mm x450mm
Net weight 35kg

 

 

Laboratory Metallographic Hot Mounting Press Manual Metallurgical Sample Mounting Press

Mounting of specimens is usually necessary to allow them to be handled easily. It also minimizes the amount of damage likely to be caused to the specimen itself.

 

The mounting material used should not influence the specimen as a result of chemical reaction or mechanical stresses. It should adhere well to the specimen, and if the specimen is to be electropolished later in the preparation then the mounting material should also be electrically conducting.

 

Specimens can be hot mounted (about 150 °C) using a mounting press either in a thermosetting plastic, e.g. phenolic resin, or a thermosoftening plastic e.g. acrylic resin. If hot mounting will alter the structure of the specimen a cold-setting resin can be used, e.g. epoxy, acrylic or polyester resin. Porous materials must be impregnated by resin before mounting or polishing, to prevent grit, polishing media or etchant being trapped in the pores, and to preserve the open structure of the material.

 

A mounted specimen usually has a thickness of about half its diameter, to prevent rocking during grinding and polishing. The edges of the mounted specimen should also be rounded to minimize the damage to grinding and polishing discs.

 

Laboratory Metallographic Hot Mounting Press Manual Metallurgical Sample Mounting Press

 

Contact Details
Iqualitrol Opassy Industry Instrument Co., Ltd.

Contact Person: iqualitrol

Send your inquiry directly to us (0 / 3000)