Send Message
English
Contact Us

Contact Person : Raymond Chung

Phone Number : 86-13711988687

WhatsApp : +8613711988687

Free call

Analysis and Solution of Water Failure in Polishing Machine

June 26, 2024

Latest company case about Analysis and Solution of Water Failure in Polishing Machine

 

Analysis and Solution of Water Failure in Polishing Machine

 

1. Problem description

The polishing machine is a common mechanical equipment used to polish and grind the surfaces of various materials. In the process of using the polishing machine, sometimes there will be water failure, which will affect the polishing effect and may even cause equipment damage. So, what is the reason for the water failure of the polishing machine and how to solve it? Below, please follow this article to learn about it.

 

2. Cause analysis

2.1. Insufficient water pressure

The polishing machine requires a certain water pressure to ensure smooth water flow. If the water pressure is insufficient, the water will not flow normally, which will affect the polishing effect. At this time, it is necessary to check whether the water pressure is normal. If it is insufficient, the water pressure should be adjusted in time.

 

2.2. Waterway blockage

Waterway blockage is one of the common reasons for the water failure of the polishing machine. In the process of using the polishing machine, impurities or sediments will be mixed in the water, and these impurities will gradually accumulate in the waterway, causing the waterway to be blocked. At this time, the waterway needs to be cleaned to remove the impurities.

 

2.3. Water pipe rupture

The gears and drive chains of the polishing machine will vibrate, and this vibration will cause friction on the water pipe, which will cause the water pipe to rupture. At this time, the damaged water pipe needs to be replaced.

 

3. Solution

3.1. Check the water pressure

If the water pressure is insufficient, you can adjust the water pressure. If you are not sure how to adjust it, you can check the instruction manual of the polisher.

 

3.2. Clean the water circuit

To clean the water circuit, you need to turn on the water circuit switch and drain valve, flush the water circuit with clean water, and clean the impurities in the water circuit.

 

3.3. Replace the water pipe

If the water pipe is broken, you need to replace the water pipe in time. To replace the water pipe, you need to turn off the water circuit switch first, remove the damaged water pipe, and replace the previous damaged water pipe with a new one.

 

Get in touch with us

Enter Your Message

sales@iqualitrol.com
+8613711988687
iqualitrol
iqualitrol
86-13711988687