Fully Automatic Micro Vickers hardness tester CAHVST-2ZXY with Max Loading 2kgf
Brief Introduction:
The iqualitrol CAHVST-2ZXY fully automatic micro hardness tester is mainly used for measuring small and thin test pieces and brittle hardware.
It can be widely used in various metals (ferrous metals, non-ferrous metals, castings, alloy materials) by selecting various accessories or upgrading various structures. Etc.), metal structure, metal surface processing layer, electroplated layer, hardened layer (oxidation, various infiltration layers, coating), heat-treated test piece, carbonized test piece, quenched test piece, minute part of phase inclusion, glass, agate Testing of brittle and hard non-metallic materials such as artificial gemstones and ceramics.
It is especially suitable for measuring the hardness gradient profile of workpieces in large quantities and the hardness test of specified parts.
The automatic stage controlled by the built-in stepping motor has a variety of control modes through mouse click control, high positioning accuracy, good repeatability, fast moving speed and high work efficiency;
Technical Specifications:
| Micro hardness scale | HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1, HV2 |
| monitor | 7” LCD monitor |
| Test force（gf） | 10, 25, 50, 100, 200, 300, 500, 1000, 2000 |
| Load control | Automatic (load/hold/unload） |
| Test force retention time | 5～60 seconds |
| Test force selection | External force selection knob, the test force is automatically displayed on the 7-inch LCD touch display |
| Objective magnification | 10X, 40X |
| Optical channel | Double optical channel (eyepiece and CCD camera channel) |
| Optical system (dual optical channel, no need to switch） |
1. Automatic digital encoder; 2, total magnification (μm): 100X (observation), 400 × (measurement); 3. Measurement range (μm): 200; 4, resolution (μm): 0.01 |
| Hardness measurement range | (5-3000)HV |
| Data output (optional)） | Built-in printer, test data can also be saved to USB flash drive for storage analysis |
| Maximum height of the test piece(mm) | 90 |
| Maximum width of test piece(mm) | 120, indenter center line to machine wall distance) |
| voltage | AC220V/50HZ |
| Weight(kg) | 40 |
Contact Person: Mr. Raymond Chung
Tel: 86-13711988687
Fax: 86-769-22784276
| Factory Address:No. 88 Jiaolian Yiheng Rd, Wanjiang District, Dongguan, China, 523046 | |
| Sales office:Room 301, Building No.1, No. 2 Jiaolian Yiheng Rd, Wanjiang District, Dongguan, China, 523046 | |
| +86--13711988687 | |
| sales@iqualitrol.com | |
