Home News

Principle of Knoop Hardness Test

Certification
Good quality Vickers Hardness Testing Machine for sales
Good quality Vickers Hardness Testing Machine for sales
Customer Reviews
The touch screen micro vickers hardness tester has been installed a few weeks ago, everything is OK. Thanks for your advice and excellent service.

—— Mr. David Chambers

Thanks for the fast delivery and our customer is very satisfied for the rockwell hardness tester, and hope more orders soon.

—— Neil Renato

After we visited the customer, they finally decided to purchase Brinell hardness tester iBrin-413Z, now we have installed the unit at customer’s site,

—— Fermin Lee

Thank you for the indenters (diamond  cone 120 degrees). We recently got it and already tested it. Indenters  are good as we expected. 

—— Dalius Skinulis

The Measurements are good for Brinell Tester HBST-3000.

—— Sun Chull Kim

I'm Online Chat Now
Company News
Principle of Knoop Hardness Test
Principle of Knoop Hardness Test

Knoop hardness test usually refers to static indentations made with loads not exceeding 1 kgf. The indenter is Knoop elongated diamond pyramid.

 

The procedure for testing is very similar to that of the standard Vickers hardness test, except that it is done on a microscopic scale with higher precision instruments.

 

The surface being tested generally requires a metallographic finish; the smaller the load used, the higher the surface finish required. Precision microscopes are used to measure the indentations; these usually have a magnification of around 500X and measure to an accuracy of +0.5 micrometers. Also with the same observer differences of +0.2 micrometers can usually be resolved. It should, however, be added that considerable care and experience are necessary to obtain this accuracy.

Principle of Knoop Hardness Test

 

Knoop Hardness Indenter Indentation

 

The Knoop hardness number KHN is the ratio of the load applied to the indenter, P (kgf) to the unrecovered projected area A (mm2)

 

KHN = F/A = P/CL2

 

Where:
F = applied load in kgf
A = the unrecovered projected area of the indentation in mm2
L = measured length of long diagonal of indentation in mm
C = 0.07028 = Constant of indenter relating projected area of the indentation to the square of the length of the long diagonal.

The Knoop indenter is a diamond ground to pyramidal form that produces a diamond shaped indentation having approximate ratio between long and short diagonals of 7:1. The depth of indentation is about 1/30 of its length. When measuring the Knoop hardness, only the longest diagonal of the indentation is measured and this is used in the above formula with the load used to calculate KHN. Tables of these values are usually a more convenient way to look-up KHN values from the measurements.

 

Pub Time : 2017-02-14 16:00:48 >> News list
Contact Details
Iqualitrol Opassy Industry Instrument Co., Ltd.

Contact Person: Mr. Raymond Chung

Tel: 86-13711988687

Fax: 86-769-22784276

Send your inquiry directly to us (0 / 3000)