Home News

The Difference Between Brightfield and Barkfield

Certification
Good quality Vickers Hardness Testing Machine for sales
Good quality Vickers Hardness Testing Machine for sales
Customer Reviews
The touch screen micro vickers hardness tester has been installed a few weeks ago, everything is OK. Thanks for your advice and excellent service.

—— Mr. David Chambers

Thanks for the fast delivery and our customer is very satisfied for the rockwell hardness tester, and hope more orders soon.

—— Neil Renato

After we visited the customer, they finally decided to purchase Brinell hardness tester iBrin-413Z, now we have installed the unit at customer’s site,

—— Fermin Lee

Thank you for the indenters (diamond  cone 120 degrees). We recently got it and already tested it. Indenters  are good as we expected. 

—— Dalius Skinulis

The Measurements are good for Brinell Tester HBST-3000.

—— Sun Chull Kim

I'm Online Chat Now
Company News
The Difference Between Brightfield and Barkfield
The Difference Between Brightfield and Barkfield

Brightfield (BF) illumination is the most common illumination technique for metallographic analysis. In incident BF, the light path comes from the light source, passes through the objective lens, is reflected off the surface of the specimen, returns through the objective, and finally reaches the eyepiece or camera for observation.

 

Flat surfaces produce a bright background due to reflection of a large amount of the incident light into the objective lens, while non-flat features, such as cracks, pores, etched grain boundaries or features with distinct reflectivity, such as precipitate and second phase inclusions on the surface appear darker as incident light is scattered and reflected at a variety of angles or even partially absorbed.

 

Darkfield (DF) is a less known but powerful illumination technique. The light path for DF illumination passes through an outer hollow ring of the objective, falls onto the specimen at a high angle of incidence, reflects off the surface, then passes through the interior of the objective lens, and finally reaches the eyepiece or camera.

 

This type of illumination causes flat surfaces to appear dark, as the vast majority of the light reflected at the high incident angle misses the interior of the objective lens. For samples having a flat surface with occasional non-flat features – cracks, pores, etched grain boundaries, etc. – the DF image shows a dark background with brighter areas corresponding to the non-flat features, which scatter more light into the objective.

 

The Difference Between Brightfield and Barkfield         The Difference Between Brightfield and Barkfield

         Brightfield: Only direct light falls on the sample         Darkfield: Only refracted, diffracted or reflected
         surface, where it is absorbed or reflected. The         light falls on the sample surface. Darkfield is suitable
         quality parameters of the image are brightness,       for all samples with structured surfaces and can
         resolution, contrast and field depth.                          also be used to visualize structures below the

                                                                                            resolution limit. The surface structures appear 

                                                                                            bright on a dark background.      
            

Pub Time : 2017-02-21 15:20:18 >> News list
Contact Details
Iqualitrol Opassy Industry Instrument Co., Ltd.

Contact Person: Mr. Raymond Chung

Tel: 86-13711988687

Fax: 86-769-22784276

Send your inquiry directly to us (0 / 3000)