Color Display Single Crystal Ultrasonic Thickness Gauge IQUALITROL iSonic-3000HMC
Technical parameters:
| Measurement range |
Pulse-echo method: 1.2mm-26mm Echo-echo method: 0.2mm-13mm Multiple wave test method: 0.2mm-9mm Automatic mode: 0.2mm-26mm |
| Measurement resolution | 0.001 or 0.01 or 0.1 |
| Material sound velocity range | 1000-9999m/s |
| Working Environment | Temperature: -10C - 60C; relative humidity less than 90% |
| Dimension & weight | 146mm*81mm*30mm, 300g (including battery) |
| Measuring units | mm or inch |
| Power supply | two AA batteries |
| Display | 2.4 TFT color display (320x240) |
Main functions:
1. Display mode:
A-SCAN: Display the echo waveform of the workpiece;
B-SCAN: Time-based B scan, display the cross-section of the workpiece;
Normal mode: Large digital view of the thickness value;
Difference Value mode: Display the difference between the actual thickness and the preset thickness and the thinning percentage;
Maximum value capture: Display the current thickness value, minimum thickness value and maximum thickness value at the same time;
2. Gain: Real-time adjustable;
3. Instrument shutdown: Automatic shutdown after 5, 10, 20 minutes of no operation, or manual shutdown;
4. Probe used: Single crystal delay single head (15MHz);
5. Alarm setting: When the measured value is greater than the upper and lower limits, change the displayed thickness value color and waveform color to indicate an alarm.
Contact Person: Mr. Raymond Chung
Tel: 86-13711988687
Fax: 86-769-22784276
| Factory Address:No. 88 Jiaolian Yiheng Rd, Wanjiang District, Dongguan, China, 523046 | |
| Sales office:Room 301, Building No.1, No. 2 Jiaolian Yiheng Rd, Wanjiang District, Dongguan, China, 523046 | |
| +86--13711988687 | |
| sales@iqualitrol.com | |
