Payment & Shipping Terms:
|203mm (Opt. 250mm)
|Easy To Use, Safe And Reliable
metallographic polishing machine,
double disc polishing machine
Double Disc Metallographic Grinding and Polishing Machine Double Speed Laboratory Grinder
Technical Data Sheet: iqualitrol Grinding and Polishing Machine iGrind-812
Double-disc iGrind-812 is applicable to rough grinding, fine grinding and polishing of metallographic samples. The machine has two-step constant speed of 300rpm and 600rpm with wide application.
iGrind-812 is an indispensable equipment in making the metallographic sample, also has a cooling device to cool the sample during grinding and polishing to preventing the damage of metallographic structure caused by overheat.
It is easy to use, safe and reliable, an ideal sample preparation equipment for the labs of factories, research institutes and universities and colleges.
|725 x710 x310mm
Pre-grinder machine is the result of a large-scale research work and the wisdom of the designers as well as the suggestions of the users. As an excellent piece of specimen pre-grinding, the pre-grinder has a lap with a larger diameter compared with the same kind of machines produced in our country and the rotational speed of its lap is quite different form that of the machines turned out in our country in order to meet the requirements of the pre-grinding of various materials.
The working principle of Pre-grinder machine is as follows: clear water provided by a water tube flows into the rotating lap and the abrasive paper flowing over the water throws the water out of the lap as the result of the excentric force of the rotating lap forming a vacuum space before the atmospheric rescuer presses the abrasive paper on the lap tightly. Now it is time to operate the pre-grinding. When the lap stops rotating, the work is done and abrasive paper can be easily taken off.
MP-2D metallographic sample grinding and polishing machine is a two-speed double-drive desktop machine, which is suitable for rough grinding, fine grinding and polishing operations on metallographic samples.
The machine has two speeds of 600 rpm and 300 rpm, which makes the machine more widely applicable and is an indispensable equipment for users to make metallographic samples. The machine is equipped with a cooling device, which can cool the sample during grinding and polishing to prevent the metallographic structure from being damaged due to overheating of the sample.
The machine is easy to use, safe and reliable, and is an ideal sample preparation equipment for factories, scientific research units and laboratories of colleges and universities.
It is suitable for automatic sample preparation in the process of rough grinding, fine grinding, rough polishing to fine polishing of metallographic samples. It is an ideal sample preparation equipment for enterprises, scientific research units and laboratories of colleges and universities.
Contact Person: Mr. Raymond Chung
Features: minimize the wearing of the sample, eliminate the surface stress and bring excellent flatness with less stress deformation
Application: Titanium, Aluminium, pure Copper and Copper alloys, Aluminium alloys, steel and Nickel-based alloys
piezoelectric vibratory plate: Low power consumption& noise design
Disc Replace: Easily replacement design on disc, convenient to change and clean