Payment & Shipping Terms:
|Disc Diameter:||250mm||Rotate Speed:||50-1000rpm|
|Disc Qty:||Double||Rotate Direction:||Clockwise And Anticlockwise|
metallographic polishing machine,
double disc polishing machine
Single Pressure Automatic Metallographic Grinding and Polishing Machine with Double Disc
iqualitrol iGrind-819 apply advanced microprocessor control system, which control sample preparation process.
Grinding disc support the rotation in clockwise and anticlockwise, stepless speed within 50-1000rpm, pneumatic single point loading.
iqualitrol iGrind-819 can grind and polish 6pcs specimen simultaneously, also suitable for the single specimen sample preparation pressure, time setting is intuitive and convenient.
iGrind-819 is applicable to rough grinding, fine grinding, coarse polishing and fine polishing process, it is an ideal equipment for enterprises, scientific research institutions and colleges laboratory.
|Polishing Head Speed||5-100rpm|
|Sample Quantity||6 PCS|
The metallographic grinding and polishing machine made by iqualitrol has passed CE certification. It features a sturdy and durable cast aluminum base, equipped with high-precision spindle and transmission mechanism, which effectively absorbs vibration during grinding and greatly increases comfort in use.
It can obtain smoother grinding samples and reduce laboratory noise. The machine can be equipped with a fast magnetic adapter, compatible with various diamond grinding systems, facilitating quick switching of various grinding consumables and greatly expanding the scope of equipment applications.
The stainless steel ceramic faucet customized by a Taiwanese sanitary ware manufacturer is used to meet the special needs of metallographic grinding, including water flow rate and angle, while also being aesthetically pleasing and practical.
The drainage system adopts an anti-clogging triangular waterway design to solve the problem of clogging caused by grinding consumables for long-term users. We use the shortest waterway distance and angle design to reduce the probability of clogging.
The waterproof film panel has 9 sets of grinding and polishing parameter memory functions. Different grinding speeds, directions, and times can be set for different materials and requirements, which can be changed at any time to meet different grinding and polishing needs.
When used for automatic polishing, an automatic dripping device can be purchased to allow polishing consumables (diamond suspensions, alumina powder, final polishing liquid) to automatically drip onto the polishing disc according to the set time.
HPA-1 Metallographic Grinding Machine designed through various investigation and gathering opinions and requirements of various users. Adapt to the needs of grinding more material. The disc diameter greater than the domestic similar products. The speed of the mill is different from domestic products, is an excellent sample grinding equipment.
Grinding and polishing is the final stage in the metallographic sample preparation process and consists of several steps. Each step uses finer abrasive than the previous one, the ultimate goal being to produce a deformation-free, scratch-free and highly reflective sample surface. The sample may need to be examined, either etched or unetched, to reveal the microstructure of the material. It frequently happens that contrasts in the material are only visible after a successful etching step.
Contact Person: Mr. Raymond Chung
Features: minimize the wearing of the sample, eliminate the surface stress and bring excellent flatness with less stress deformation
Application: Titanium, Aluminium, pure Copper and Copper alloys, Aluminium alloys, steel and Nickel-based alloys
piezoelectric vibratory plate: Low power consumption& noise design
Disc Replace: Easily replacement design on disc, convenient to change and clean