Home News

How Drop Impact Test Machine Works

Certification
Good quality Vickers Hardness Testing Machine for sales
Good quality Vickers Hardness Testing Machine for sales
Customer Reviews
The touch screen micro vickers hardness tester has been installed a few weeks ago, everything is OK. Thanks for your advice and excellent service.

—— Mr. David Chambers

Thanks for the fast delivery and our customer is very satisfied for the rockwell hardness tester, and hope more orders soon.

—— Neil Renato

After we visited the customer, they finally decided to purchase Brinell hardness tester iBrin-413Z, now we have installed the unit at customer’s site,

—— Fermin Lee

Thank you for the indenters (diamond  cone 120 degrees). We recently got it and already tested it. Indenters  are good as we expected. 

—— Dalius Skinulis

The Measurements are good for Brinell Tester HBST-3000.

—— Sun Chull Kim

Hey, the hardness tester iVick-484ST was installed last week and works well, thanks for the professional support.

—— Sabinian Smith

I'm Online Chat Now
Company News
How Drop Impact Test Machine Works
How Drop Impact Test Machine Works

 

How Drop Impact Test Machine Works?

 

Drop Impact Test machine is to test large and heavy package products’ drop impact performance, through simulates real face ,edge and corner drop conditions.

 

This equipment mainly used to inspect package products drop resistance capability during transportation ,load and unload works, thus help improve the package design.

Testing Procedure: 
1. Fix the specimen on the drop arm, lift to the certain drop height, only±2% difference allowed between the height and setting value. Drop height refers to the distance between the lowest point when release the specimen and the shock impact plate.

2. Release the specimen according to below predetermined state:

    A. Face dropping, the angle between the specimen drop face and flat plane should within 2º;

    B. Edge dropping, the angle between the edge and the flat plane within 2º,the angle between upper face of specimen and shock plate within ±5ºor 10% of angle(Whichever is the larger value),ensure the specimen gravity line through the dropping edge.

    C. Corner dropping, the angle tolerance between the specimen upper face and shock impact plate less than or 10% of the angle(Whichever is the larger value),ensure the specimen gravity line through the dropping corner..,

    D. No matter what kind shape or status of the specimen, all have to ensure the gravity line of the specimen through the dropping face, edge and corner.

3. The difference between the actual shock speed and the speed when free dropping should within ±1% .

4. After testing, check the package and inner products damage condition according to related standard or regulations. And analyze the testing result.


How Drop Impact Test Machine Works

Pub Time : 2022-05-21 11:26:57 >> News list
Contact Details
Iqualitrol Opassy Industry Instrument Co., Ltd.

Contact Person: Mr. Raymond Chung

Tel: 86-13711988687

Fax: 86-769-22784276

Send your inquiry directly to us (0 / 3000)