Payment & Shipping Terms:
|Model:||SQ-80||Dimension:||Cut Wheel Φ250mm X1.2mm X32mm|
|Diameter:||Cut Diameter Φ80mm||Power Supply:||380V/50HZ/3Ph/4 Wires|
precision cutting machine,
abrasive cutting machine
Max Section 80mm Water Cooling Manual Metallographic Cutting Machine with Ratation 2800rpm
iqualitrol SQ-80 is suitable for cutting all kinds of specimens including metallic materials and nonmetallic materials so as to observe metallographic structure and lithofacies structure.
The built-in cooling circuit could help to prevent burning the sample tissue due to overheating durning the cut-off process.
SQ-80 is quiet convenient , safety and reliable .It is one of the specimen-making equipments necessary for metallographical test for factory ,researching unit and college and university laboratory .
|Input voltage||380V/50HZ/3Ph/4 Wires|
|Cutting wheel size||Φ250mm x 2mm x32mm|
|MAX cutting diameter||Φ80mm|
|Dimension||690mm x740mm x670mm|
Manual Metallographic Cutting Machine:
When cutting a specimen from a larger piece of material, care must be taken to ensure that it is representative of the features found in the larger sample, or that it contains all the information required to investigate a feature of interest.
One problem is that preparation of the specimen may change the microstructure of the material, for example through heating, chemical attack, or mechanical damage. The amount of damage depends on the method by which the specimen is cut and the material itself.
Cutting with abrasives may cause a high amount of damage, while the use of a low-speed diamond saw can lessen the problems. There are many different cutting methods, although some are used only for specific specimen types. iqualitrol provides the iCut-864 low speed diamond saw for cutting OM (optical microscope), SEM (scanning electron microscope), and even TEM (transmission electron microscope) specimen.
Contact Person: Mr. Raymond Chung