Send Message
Home News

Tensile Testing Machine Operating Procedures and Instructions

Certification
China Dongguan Quality Control Technology Co., Ltd. certification
China Dongguan Quality Control Technology Co., Ltd. certification
Customer Reviews
The touch screen micro vickers hardness tester has been installed a few weeks ago, everything is OK. Thanks for your advice and excellent service.

—— Mr. David Chambers

Thanks for the fast delivery and our customer is very satisfied for the rockwell hardness tester, and hope more orders soon.

—— Neil Renato

After we visited the customer, they finally decided to purchase Brinell hardness tester iBrin-413Z, now we have installed the unit at customer’s site,

—— Fermin Lee

Thank you for the indenters (diamond  cone 120 degrees). We recently got it and already tested it. Indenters  are good as we expected. 

—— Dalius Skinulis

The Measurements are good for Brinell Tester HBST-3000.

—— Sun Chull Kim

Hey, the hardness tester iVick-484ST was installed last week and works well, thanks for the professional support.

—— Sabinian Smith

I am glad to inform you that the installation of the SHB-3000C Brinell hardness tester has been finished successfully. I would like to thank you!

—— Robbin

I'm Online Chat Now
Company News
Tensile Testing Machine Operating Procedures and Instructions
Latest company news about Tensile Testing Machine Operating Procedures and Instructions

 

Tensile Testing Machine Operating Procedures and Instructions

 

1. Machine preparation:

a. Ensure that the electronic tensile testing machine has a suitable power supply and grounding.

b. Check whether the various components of the testing machine are intact, such as fixtures, fixture wrenches, etc.

c. Check whether the safety protection devices of the testing machine are working properly.

 

2. Sample preparation:

a. Select suitable samples according to the test requirements and prepare sufficient quantities.

b. Clean the surface of the sample to ensure that there are no impurities.

c. Properly handle the sample in accordance with standard operating procedures, such as cutting, grinding wheel dressing, etc.

 

3. Test setup:

a. Turn on the power of the electronic tensile testing machine and ensure that the instrument display is normal.

b. Adjust the parameters of the testing machine according to the test requirements, such as loading speed, test mode (tension or compression), test range, etc.

c. Select a suitable fixture according to the size and shape of the sample and install the fixture correctly.

d. Put the sample into the fixture and ensure that the fixture firmly fixes the sample.

 

4. Test operation:

a. Ensure that the operator wears relevant safety equipment, such as gloves, goggles, etc.

b. Start the test machine and start the test.

c. Observe the instrument data during the test, such as load value, deformation value, etc., and record them.

d. Pay attention to the failure form of the sample and abnormal conditions during the test, such as noise, odor, etc.

e. After the test, stop the test machine and record the test results.

 

5. Data processing:

a. Calculate the various mechanical performance indicators required according to the test results, such as tensile strength, yield strength, etc.

b. Statistics and analysis of the data during the test, and organize them into reports or records.

 

6. Test machine maintenance:

a. Regularly check the various components of the test machine to ensure their normal operation.

b. Clean the internal and external surfaces of the test machine, and prevent dust and debris from entering the machine.

c. Regularly replace wearing parts according to the maintenance instructions provided by the manufacturer. d. If there is any fault or abnormal situation, please contact professional technicians for repair or processing in time.

 

The above are the operating procedures and instructions for use of the electronic tensile testing machine. Please note that in actual operation, the relevant standards and safety regulations should be strictly followed to ensure the accuracy of the test and the safety of personnel.

 

Pub Time : 2024-06-07 07:56:16 >> News list
Contact Details
Dongguan Quality Control Technology Co., Ltd.

Contact Person: Mr. Raymond Chung

Tel: 86-13711988687

Fax: 86-769-22784276

Send your inquiry directly to us (0 / 3000)