|
Product Details:
Payment & Shipping Terms:
|
| Model: | ILeeb-600 | Impact Direction: | Automatically Detect And Identify Direction |
|---|---|---|---|
| Display: | Full Colour LCD 320 X 240 Dot Matrix Screen | Calibration: | Basic Single-point Calibration Or Multi-point Calibration |
| Conversion: | Integrated Leeb Hardness Conversion Function | Storage: | 500 Measurement Series.(Relative To Average Times 32～1) |
| Highlight: | IP65 Portable Leeb Hardness Tester,ABS Portable Leeb Hardness Tester,320×240 Dots Portable Hardness Tester |
||
iLeeb-600 Portable Leeb Hardness Tester Conform IP65 Protection Automatically Identify Impact Direction
Brief Introduction:
Iqualitrol iLeeb-600 portable Leeb hardness tester uses the leeb hardness tester theory to test a wide range of materials. The dynamic leeb impact device is compatible with 7 different types of impact devices.
iLeeb-600 will automatically detect and identify the impact device without the need to constantly calibrate the device. It will also automatically check the impact device connection status and direction (except for G impact device). It can support 360 degree measurements.
iLeeb-600 has a full colour LCD 320 x 240 dot matrix screen with adjustable brightness for use in all environmental conditions.
The user can perform basic single-point calibration or multi-point calibration. This can be used to convert curve to reduce measurement error. It also has integrated leeb hardness conversion function. This converts between HLD and HLC, HLG, HLDL, HLD + 15 for ease of calibration and test result conversion.
Technical Specification:
| Measuring range | (170～960)HLD |
| Impact direction |
vertically downward, oblique, horizontal, oblique, |
| Error | D,±6 HLD |
| Repeatability | D,6 HLD |
| Material |
Steel and cast steel,Cold work tool steel,Stainless steel,Grey cast iron, Nodular cast iron,Cast alu |
| Hardness Scale | HL, HB, HRB, HRC, HRA, HV, HS |
| Impact energe | D----11mJ |
| Impact weight | D----5.5g/7.2g |
| Impact ball hardness | 1600HV |
| Impact ball diameter | D----3mm |
| Impact ball material | D----Tungsten carbide |
| Sample surface roughness | D----1.6μm；C----0.4μm |
| Min depth of harness layer | D≥0.8mm；C≥0.2mm |
| Protective Level | IP65 |
| Display | olor TFT,320×240 dots, dot-matric LCD |
| Storage | 500 measurement series.(Relative to average times 32～1) |
| Calibration | Basic (single-point) calibration and multi-point calibration function |
| Data printing | By connecting the PC to print |
| Power voltage | 3V,two AA size, alkaline batteries |
| Power supply | Two ordinary AA batteries |
| Power consumption | Low-power design |
| Standby period | About 100 hours(with default brightness) |
| Commumication port | USB1.1 |
| Working language | Chinese-English converting |
| Shell material | ABS plastic seal design |
| Dimensions | 150mm×76mm×38mm |
| Weight | 5KG |
| PC software | Have |
Contact Person: Mr. Raymond Chung
Tel: 86-13711988687
Fax: 86-769-22784276
| Factory Address:No. 88 Jiaolian Yiheng Rd, Wanjiang District, Dongguan, China, 523046 | |
| Sales office:Room 301, Building No.1, No. 2 Jiaolian Yiheng Rd, Wanjiang District, Dongguan, China, 523046 | |
| +86--13711988687 | |
| sales@iqualitrol.com | |
