Diamond Cutting Blade Saw for Manual and Automatic Metallographic Cutting Machine Cutter

Diamond Cutting Blade Saw for Manual and Automatic
Metallographic Cutting Machine Cutter

Brief Introduction:

Diamond blade is a saw blade which has diamonds fixed on its edge for cutting hard or abrasive materials. They have many uses, including cutting stone, concrete, asphalt, bricks, coal balls, glass, and ceramics in the construction industry;

cutting semiconductor materials in the IT industry;
and cutting gemstones, including diamonds, in the gem industry.

Technical Specifications:

Dimensions of iqualitrol diamond blades:

100x20x0.5mm

200x32x1.0mm

When cutting a specimen from a larger piece of material, care must be taken to ensure that it is representative of the features found in the larger sample, or that it contains all the information required to investigate a feature of interest.

One problem is that preparation of the specimen may change the microstructure of the material, for example through heating, chemical attack, or mechanical damage. The amount of damage depends on the method by which the specimen is cut and the material itself.

Cutting with abrasives may cause a high amount of damage, while the use of a low-speed diamond saw can lessen the problems. There are many different cutting methods, although some are used only for specific specimen types. iqualitrol provides the iCut-864 low speed diamond saw for cutting OM (optical microscope), SEM (scanning electron microscope), and even TEM (transmission electron microscope) specimen.