Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
More information facilitates better communication.
Submitted successfully!
Model:XJC-25D
Charpy:Impact energy (J): 1, 2, 4, 5, 7.5, 15, 25
Izod:Impact energy (J): 1, 2.75, 5.5, 11, 22
Impact speed:Charpy 0.5-5J: 2.9m/s；7.5J-50J: 3.8m/s
ASR-5605:Melt Flow Rate Meter
Printing:Built-in Micro printer automatically prints output
Temperature recovery time:less than 4 minutes
Cutting method:manual cutting, automatic (optional)
Capacity:10 - 1000N
Test stroke:350 mm
Induction method:push force meter
Test speed:5 ~ 300mm/min
testing load:Maximum 30N for ATH-30
Power:13W (without printer)
Working temperature:20±10℃
Model:ATH-30
Force Capacity:Select one from 2, 5, 10, 20, 50, 100, 200, 500kgf
Test Space:Front and back 120mm,right left no limit
Resolution:Force resolution 1/10,000
Range:Test range of capacity 1~100%F.S
Force:Force Accuracy ±1.0%
Capacity:Max 2000kgf
Temperature:Range from 0 ~ 200℃
Control Mode:P.I.D. Automatic Calculation.
Deformation:Resolution 0.01mm
Peak Load:1000KN
Resolution:1KN /0.1kg/ 0.1Klbs
Temperature:5° C~35° C
Humidity:15%~80%RH
Model:iPT-1167HXX
Vertical Travel:Max 450mm，exclude grip
Machine Structure:adopts aluminum extruded sealing plate with high precision double rolling screw and guide column
Control System:ac servo motor with high response frequency high efficiency, stable transmission, low noise
