Payment & Shipping Terms:
|Transmission:||Ball Screws||Drive Motor:||Servo Motor|
material testing instruments,
material testing equipment
Button-Switch Load Displacement Curve Tester for Various Buttons and Switches (Load-Displacement), the software operation is simple and convenient, and all data can be saved (test conditions, displacement curves, life curves, inspection reports, etc.).
It uses a servo motor drive to provide a high-precision (load-displacement) measurement that results in a completely accurate key and switch curve test.
1, PEAK FORCE, RETURNFORCE, DISTANCE and CLICK rates can be directly displayed on the graph without manual calculation.
2, The measurement curve is remembered by the computer and can be zoomed in and out at any time. A piece of A4 paper can be arbitrarily designated to place N graphs
3, The upper and lower limit specifications can be entered for the measurement item. The measurement result can be automatically determined by OK or NO.
4, The maximum measurement stroke and load can be input, and the computer automatically controls.
5, Test report can be converted to EXCEL and other report formats.
6, Inspection report can be generated automatically, no need to input again.
7, Inspection report header can be modified at any time.
8, The test conditions are set by the computer screen, convenient and fast.
9, Test data is stored on the hard disk. (Each data can be stored for an unlimited number of times).
10, The computer directly prints and stores the force displacement curve and inspection report. (No squared paper is required, normally A4 paper is sufficient).
11, Load unit display N, Ib, g, kg can be freely switched S205 button-switch load.
|Max measurement height||100mm|
|Measurement speed range||0-100mm/min|
|Drive Motor||Panasonic Servo Motor|
|Power supply||AC220V/110V, 50/60Hz, 1Ph|
Contact Person: Mr. Raymond Chung