Payment & Shipping Terms:
|Control Mode:||CPU Control System||Motor Type:||Stepping Motor With Small Noise|
|Metal Shell:||Die Casting, Rugged And Stable||Application:||Cast Iron, Steel Products, Nonferrous Metal|
Durable Brinell Hardness Testing Machine,
Electronic Brinell Hardness Testing Machine,
CE Electronic Brinell Hardness Tester
Rigid Structure Durable Electronic Brinell Hardness Testing Machine with 10 Steps Loading Force
Brinell hardness testing is mainly used in hardness determination for metallic materials such as cast iron, steel profiles, nonferrous metals and soft alloys, and also can be used for testing of hard plastics, bakelite and some other nonmetallic materials. It is suitable for using in factories, workshops, laboratories, universities and research institutes.
HBE-3000A Electronic Cast Iron Brinell Hardness Tester is the closed loop sensor loading, the electronic control system, has 10 levels test force. The machine has high precision, high repeatability and stability, simple operation, etc
1, High accuracy compression sensor to feedback and the CPU control system to automatically compensate the test force lost during the testing.
2, 10 Steps Testing force for wider application;
3, Equips with stepping motor to realize automatic loading, dwell and unloading, with much lower noise during testing;
4, Die casting metal shell, stable structure, able to work under rugged environment;
5, Surface with car baking process, strong resistance of scratches, still brightness after years using;
6, Available to install optional Brinell measuring software, largely improve working efficiency.
Suitable for cast iron, steel products, nonferrous metals and soft alloys etc. Also suitable for some nonmetal materials such as rigid plastics and bakelite etc.
Because of the wide test force range the Brinell test can be used on almost any metallic material. The part size is only limited by the testing instrument's capacity.
1, One scale covers the entire hardness range, although comparable results can only be obtained if the ball size and test force relationship is the same
2, A wide range of test forces and b all sizes to suit every application
3, Nondestructive, sample can normally be reused
1, The main drawback of the Brinell test is the need to optically measure the indent size. This requires that the test point be finished well enough to make an accurate measurement
2, Slow. Testing can take 30 seconds not counting the sample preparation time
|Brinell Scales||HBW2.5/62.5, HBW2.5/187.5, HBW5/125, HBW5/750, HBW10/1000, HBW10/1500, HBW10/3000, HBW10/250, HBW10/500, HBW10/100|
|Test Force||62.5kgf(612.9N), 100kgf(980.7N), 125kgf(1226N), 187.5kgf(1839N), 250kgf(2452N), 500kgf(4903N),750kgf(7355N), 1000kgf(8907N), 1500kgf(14710N),3000kgf(29420N)|
|Hardness Reading||By Check Brinell Table|
|Microscope||1pc||Indenter 2.5, 5, 10mm||Each 1pc|
|Test Block||3pcs||Flat and “V” Shape Test Anvil||Each 1pc|
|Power Cable||1pc||Operation Manual||Each 1copy|
EXPORT STANDARD SEAWORTHY PACKING:
Contact Person: Mr. Raymond Chung